Snapper Automobile Parts 1694923 User Manual

Bumper Kit  
Mfg. No. 1694923  
Installation  
Instructions  
Kit Contents:  
3
Ref. Part No. Qty. Description  
2
1
2
3
1731989A  
1931277  
1930591  
1
4
4
Bumper Assembly  
Nut, Hex, Flange Lock, 5/16-18  
Capscrew, Flange Lock,  
5/16-18 x 3/4  
3
2
1
Figure 1. Contents  
This kit is to install a bumper onto a Regent / 500 /  
2500 / LT-200 Series Lawn Tractor.  
A
A
WARNING  
Before beginning any service work turn off the  
PTO, set the parking brake, turn off the ignition,  
and disconnect the spark plug wire(s).  
B
Kit Installation  
Figure 2. Head Light  
A. Socket and Bulbs  
B. Bezel  
HOOD REMOVAL  
1. Open the hood.  
2. Remove the socket and bulbs (A, Figure 2) by twist-  
ing the socket counterclockwise and pulling it out of  
the bezel (B). Repeat on other side.  
3. Rock the hood back slightly and lift hood and grill  
assembly (B, Figure 3) off pivot posts (C). Set hood  
on clean 4 x 4’s or workbench.  
B
D
A
C
Figure 3. Hood Removal and Installation  
A. Hinge Post  
B. Hood and Grill Assembly  
C. Pivot Post  
D. Stop  
1
 

Sennheiser Water System SDC 8200 SYS M User Manual
Sharp Air Cleaner FP R30CX User Manual
Sharp Flat Panel Television LC 22SV2U User Manual
Shure Headphones miniature microphone User Manual
Sony GPS Receiver NV U44 User Manual
Sony Portable CD Player D EJ815 User Manual
Spirit CD Player PLAYER User Manual
Stiga Lawn Mower 45 S User Manual
Sylvania VCR 6240VC1 User Manual
Tanaka Brush Cutter TBC 500 User Manual