Snell Acoustics Portable Speaker K7 User Manual

Premier Series  
K7  
Snell Signature Series loudspeakers - K7  
Is BiggerAlways Better?...Can Speakers Be Beautiful  
The Snell Series 7 loudspeakers reveal the  
depth, impact and nuance in every music and  
movie soundtrack without the obtrusive look  
and placement conflicts of typical speakers.  
Handcrafted in Massachusetts from real wood  
and solid aluminum, the elegant Series 7 with its  
soft lines and superb finish plays perfect host to  
the technology inside.  
K7 Style and room architecture play a bigger role  
in home entertainment decisions than ever  
before.The smallest of the Series 7,the K7 is  
designed to perform,regardless of placement,and  
integrate with most decor. Based on newly  
developed, high performance drivers from  
SEAS,and (quite) a bit of magic from Snell ’s chief  
engineer, Joe D ’Appolito Ph.D., the K7 betters its  
award winning predecessor, the K.5mk2,in half  
the physical size. Fine tuned with an individually calibrated crossover, the shoe-box sized K7  
plays music and movies at concert hall levels, with startling dimension and clarity.  
Dimensions:  
12High  
7Wide  
10.5Deep  
Application Alternatives:  
System Suggestions:  
IW-K7 In Wall  
CR7 Center  
Basis150 Subwoofer  
SR30 Surround  
Like all Snell loudspeakers, each K7 is hand tuned for natural imaging and sonic depth.  
Design:  
Bass Reflex Monitor  
with Rear Port  
Tweeter  
1-inch SEAS silk dome  
Boundary compensation  
"Normal" – When placed on  
stands away from wall.  
"Boundary"– When placed on  
shelf or near wall.  
End Caps  
1/4" inch aluminum,  
anodized black  
(port requires 1.5" to back-wall)  
Woofer  
5.25-inch SEAS Treated Paper,  
5 mm Excursion  
Grille  
Frequency Response  
54Hz-20kHz ± 3dB  
Perforated Steel with black  
powder-coat paint.  
Wiring  
77Hz-20kHz ± 3dB  
Video Shielding  
Bi-amp, bi-wire ready  
@ 12dBOctave w/ Port Plug  
Yes  
Finishes  
Connections  
Hand-sanded natural Cherry.  
Black-painted Walnut. Can  
be ordered in most wood  
and paint finishes.  
Sensitivity  
Crossover Frequency  
5-way, satin nickel-plated, brass  
terminals. Accepts 5/16's  
spades, pins, banana plugs and  
bare wire to 12 gauge.  
[1 Watt (2.83v) @ 1m]  
87 dB  
2.5 kHz  
Crossover  
Impedance  
Nominal 8 Ohms  
Discrete Tweeter and Woofer  
circuit boards. Time alignment and  
coherency are achieved through  
the transition region from driver to  
driver. Each crossover is  
individually tuned by our  
technicians to ± 0.5db of the  
Master Reference.  
Weight  
17 lbs.  
Cabinet Construction  
Hardwood veneer over 5/8-inch  
MDF Panels. Full length brace  
with integrated port flare.  
Radiused 1.25-inch satin-black  
MDF baffle.  
Maximum Output  
105 dB  
Recommended Power  
50 Watts minimum  
150 Watts maximum  
 

Sharp DVR GB201 User Manual
Sharp Projector XR 30S User Manual
Shure Musical Instrument ULX User Manual
Snapper Lawn Aerator 3538 User Manual
Snapper Yard Vacuum ESV25650B User Manual
Sony Camera Lens SAL24F20Z User Manual
Sony Cordless Telephone SPP ID976 User Manual
Sony Home Theater System SB V55A User Manual
Splendide Washer Dryer WDC7100XCP User Manual
Swisher Log Splitter LS10528H User Manual