Stamina Products Elliptical Trainer 55 1615 User Manual

Owner's Manual  
WARNING  
Exercise can present a health  
risk. Consult a physician  
before beginning any exercise  
program with this equipment.  
If you feel faint or dizzy,  
immediately discontinue use  
of this equipment. Serious  
bodily injury can occur if this  
equipment is not assembled  
and used correctly. Serious  
bodily injury can also occur if  
all instructions are not  
followed. Keep others and  
pets away from equipment  
when in use. Always make  
sure all bolts and nuts are  
tightened prior to each use.  
Follow all safety instructions in  
this manual.  
When calling for parts or  
service, please specify the  
following number.  
55-1615  
STAMINA PRODUCTS  
MADE IN CHINA  
CAUTION:  
Weight on this product should not exceed 250 lbs.  
Product May Vary Slightly  
From Pictured.  
This Product is Produced Exclusively by  
2040 N. Alliance, Springfield, MO 65803  
Customer Service Number  
1 (800) 375-7520  
2007, 06  
2007 Stamina Products, Inc.  
 
CALL US FIRST  
THANK YOU FOR PURCHASING THE  
STAMINA INSTRIDE ELLIPTICAL  
To help you get started, we have pre-assembled most of your  
INSTRIDE ELLIPTICAL at the factory with the exception  
of those few parts left unassembled for shipping purposes.  
Simply follow the few assembly instructions set forth in this manual.  
With regular workouts you will be getting your body into shape  
and on your way to achieving a happier and healthier lifestyle.  
Should you have any questions,  
please call our Customer Service Department toll-free number,  
1 (800) 375-7520  
Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.  
Friday, 8:00 A.M. - 3:00 P.M., Central Time.  
TELEPHONE  
CUSTOMER SERVICE  
Tel: 1 (800) 375-7520  
FAX  
ONLINE  
MAIL  
CUSTOMER SERVICE  
Fax: (417) 889-8064  
CUSTOMER SERVICE  
STAMINA PRODUCTS, INC.  
ATTN: Customer Service  
P.O. Box 1071  
Springfield, MO. 65801-1071  
3
 
BEFORE YOU BEGIN  
Thank you for choosing the INSTRIDE  
Although Stamina constructs its products with the  
ELLIPTICAL. We take great pride in producing this finest materials and uses the highest standards of  
quality product and hope it will provide many hours manufacturing and quality control, there can  
of quality exercise to make you feel better, look better sometimes be missing parts or incorrectly sized  
and enjoy life to its fullest.  
parts. If you have any questions or problems with  
Yes, it's a proven fact that a regular exercise the parts included with your INSTRIDE  
program can improve your physical and mental ELLIPTICAL, please do not return the product.  
health. Too often, our busy lifestyles limit our time Contact us FIRST!  
and opportunity to exercise. The INSTRIDE  
ELLIPTICAL provides a convenient and simple  
method to begin your assault on getting your body in  
shape and achieving a happier and healthier lifestyle.  
Before reading further, please review the drawing  
below and familiarize yourself with the parts that are  
labeled.  
If a part is missing or defective, please call us toll  
free at 1-800-375-7520 (in the U.S.). Our Customer  
Service Staff is available to assist you from 7:30A.M.  
to 5:00 P.M. (Central Time) Monday throughThursday  
and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.  
If you would like to contact us on-line, go to our  
Customer Service section.  
Read this manual carefully before using the  
INSTRIDE ELLIPTICAL.  
Be sure to have the name and model number of  
the product available when you contact us.  
Foam Grip  
Handrail  
Meter  
Tension Knob  
Upright  
Warning Label  
Left Pedal Cap  
Main Frame  
Right Cover  
Right Pedal Arm  
Left Cover  
Endcap  
Leveling Cap  
Front Stabilizer  
Right Pedal Cap  
Rear Stabilizer  
THE FOLLOWING TOOL IS INCLUDED FOR ASSEMBLY :  
Wrench  
Allen Wrench (6mm)  
4
 
HARDWARE IDENTIFICATION CHART  
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the  
end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the  
length of the bolts and screws.  
3/16"  
1/4"  
1
5/16"  
3/8"  
1/2  
1/2"  
INCHES  
0
0
1/2  
1/2  
2
3
1/2  
4
1/2  
5
1/2  
6
in.  
mm.  
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150  
length  
MILLIMETERS  
6
8
10  
12  
NOTICE: The length of all bolts and screws except those with flat heads is  
measured from below the head to the end of the bolt or screw.  
Flat head bolts and screws are measured from the top of the  
head to the end of the bolt or screw.  
length  
After unpacking the unit, open the hardware bag and make sure that you have all the following items.  
Some hardware may be already attached to the part.  
Part No. and Description  
Qty  
49  
50  
51  
Bolt, Button Head (M8 x 1.25 x 57mm)  
Bolt, Button Head (M8 x 1.25 x 60mm)  
Bolt, Button Head (M8 x 1.25 x 100mm)  
2
4
2
53  
60  
Bolt, Round Head (M6 x 1 x 43mm)  
Nylock Nut (M8 x 1.25)  
4
2
64  
Acorn Nut (M8 x 1.25)  
6
65  
66  
Arc Washer (M8)  
Lock Washer (M8)  
8
6
5
 
ASSEMBLY INSTRUCTIONS  
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all  
packing materials from your area and place them back into the box. Do not dispose of the packing materials  
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call  
our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:  
STEP 1  
Attach the FRONT STABILIZER(2) onto the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x60mm)  
(50), ARC WASHERS(M8)(65), LOCK WASHERS(M8)(66), and ACORN NUTS(M8x1.25)(64).  
STEP 2  
Attach the REAR STABILIZER(3) onto the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x60mm)  
(50), ARC WASHERS(M8)(65), LOCK WASHERS(M8)(66), and ACORN NUTS(M8x1.25)(64).  
NOTE:  
You can adjust the LEVELING CAPS(44) on the REAR STABILIZER(3) to keep the INSTRIDE  
ELLIPTICAL stable.  
6
 
ASSEMBLY INSTRUCTIONS  
L
L
R
R
STEP 3  
1. There is a "L" decal on the LEFT PEDAL ARM(4), and a "R" decal on the RIGHT PEDAL  
NOTE:  
ARM(5).  
2.  
The RIGHT PEDAL SHAFT(35) has right hand threads and is tightened by turning clockwise.  
The LEFT PEDAL SHAFT(34) has left hand threads and is tightened by turning counter clockwise.  
Place the front end of the RIGHT PEDALARM(5) on the ROLLER(40). Connect the back end of the RIGHT  
PEDAL ARM(5) to the RIGHT CRANK(32) located inside the CRANK DISK(29) as shown. Thread the  
RIGHT PEDAL SHAFT(35) into the RIGHT CRANK(32) and tighten securely. Repeat on the left side.  
STEP 4  
There is a "L" decal on the LEFT PEDAL CAP(38), and a "R" decal on the RIGHT PEDAL CAP(39).  
Attach the RIGHT PEDAL CAP(39) onto the RIGHT PEDAL ARM(5) with ROUND HEAD BOLTS  
(M6x1x43mm)(53). Repeat on the left side.  
NOTE:  
The LEFT and RIGHT PEDAL CAPS(38, 39) have a raised lip on two sides. Attach the LEFT and  
RIGHT PEDAL CAPS(38, 39) to the LEFT and RIGHT PEDAL ARMS(4, 5) so the raised lip is on  
the front and the inner side.  
7
 
ASSEMBLY INSTRUCTIONS  
Metal Fitting  
Cable End  
Strap  
Bracket  
Spring Hook  
Strap  
STEP 5: Refer to the inset drawing. Lay the UPRIGHT(6) on the floor close to the front of the MAIN  
FRAME(1). Turn the TENSION KNOB(22) on the UPRIGHT(6) counterclockwise as far as it can go, so the  
cable end extends out of the metal fitting as far as possible. Connect the CABLE END of the TENSION  
KNOB(22) into the SPRING HOOK on the end of the TENSION CABLE(21). Pull the CABLE on the  
TENSION KNOB(22) firmly and insert the cable through the slot in the bracket. Then insert the METAL  
FITTING on the end of the CABLE of the TENSION KNOB(22) into the hole at the end of the slot in the  
BRACKET. Adjust the TENSION KNOB(22) and verify that the SPRING HOOK moves when the TENSION  
KNOB(22) is adjusted.  
STEP 6: There is a strap attached inside of the UPRIGHT(6). This strap is to assist in pulling the SENSOR  
WIRE(24) through the UPRIGHT(6).  
Tie the strap to the plug end of the SENSOR WIRE(24). Pull the strap from the top of the UPRIGHT(6) to  
pull the SENSOR WIRE(24) through the UPRIGHT(6) as shown in the above illustration. The SENSOR  
WIRE(24) must extend out the top of the UPRIGHT(6).  
STEP 7  
NOTE: 1. Make sure the NYLOCK NUTS(M8x1.25)(60) fit into the hex holes on the top of the MAIN  
FRAME(1) before tightening the BUTTON HEAD BOLTS(M8x1.25x57mm)(49).  
2. Be careful not to damage the SENSOR WIRE(24) when assembling the UPRIGHT(6).  
Insert the UPRIGHT(6) into the MAIN FRAME(1) and secure with BUTTON HEAD BOLTS  
(M8x1.25x57mm)(49), ARC WASHERS(M8)(65), and NYLOCK NUTS(M8x1.25)(60).  
8
 
ASSEMBLY INSTRUCTIONS  
STEP 8  
Attach the HANDRAIL(7) onto the UPRIGHT(6) with BUTTON HEAD BOLTS(M8x1.25x100mm)(51), ARC  
WASHERS(M8)(65), LOCK WASHERS(M8)(66), and ACORN NUTS(M8x1.25)(64).  
STEP 9  
Install an AAA battery into the METER(23). See page 11 for detailed battery installation instructions. Connect  
the SENSOR WIRE(24) to the METER(23). Slide the METER(23) onto the bracket on the UPRIGHT(6).  
CAUTION: Be careful not to damage the SENSOR WIRE(24) when sliding the METER(23).  
9
 
SET UP INSTRUCTIONS  
Place the INSTRIDE ELLIPTICAL in the area where it will be used. It is recommended that the INSTRIDE  
ELLIPTICAL be placed on an equipment mat. The INSTRIDE ELLIPTICAL is approximately 33 1/2" long  
x 17 3/4" wide x 46 3/4" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 5.5 feet long  
is required for safe operation of the INSTRIDE ELLIPTICAL. Make sure that adequate space is available  
for access to and passage around the INSTRIDE ELLIPTICAL.  
LEVELING: Adjust the LEVELING CAPS(44) on the REAR STABILIZER(3) so that the INSTRIDE  
ELLIPTICAL sets on the floor without rocking.  
MOVING: Grasp the HANDRAIL(7) and REAR STABILIZER(3) to move the INSTRIDE ELLIPTICAL,  
two people are required for moving. Do not use the Pedal Arms to move the INSTRIDE  
ELLIPTICAL. The Pedal Arms will move and may pinch your hand or fingers.  
Equipment Mat  
FUNCTION INSPECTION:  
Visually inspect the INSTRIDE ELLIPTICAL to verify that assembly is as shown in the above illustration.  
Check the function of the INSTRIDE ELLIPTICAL. Stand on the foot pedals and place your hands at a  
comfortable position on the handrail. Slowly move your highest foot forward and follow the natural path of  
the machine. Turn the crank slowly through one complete revolution to verify that the drive train functions  
properly. Adjust the TENSION KNOB(22) and verify that it functions properly.  
Locate and read the WARNING LABEL(69) on the INSTRIDE ELLIPTICAL. Make sure that  
CAUTION:  
all users read the WARNING LABEL(69).  
10  
 
OPERATIONAL INSTRUCTIONS  
USING THE ELECTRONIC METER  
Pedal movement or press the button.  
POWER ON:  
POWER OFF:  
Automatic shut off after four minutes of inactivity.  
FUNCTION BUTTON:  
MODE/RESET : Press and release to select functions.  
Press and hold for three seconds to reset all  
functions to zero.  
FUNCTIONS:  
SCAN: Automatically scans TIME, SPEED, DISTANCE, and CALORIES in sequence with a change  
every four seconds. Press and release the button until "SCAN" appears on the display.  
TIME: Displays the time from one second up to 99:59 minutes.  
SPEED: Displays the current speed from zero to 999.9 Miles per hour.  
DISTANCE: Displays the distance from zero to 999.9 miles.  
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.  
The calorie readout is an estimate for an average user. It should be used only as a comparison  
between workouts on this unit.  
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will  
be kept. Push the button and hold it down for three seconds to reset all functions to zero.  
AAA Battery  
HOW TO INSTALL AND REPLACE BATTERY:  
1. Open the Battery Door on the back of the meter.  
2. The meter operates with an AAA battery, included. Refer to the  
illustration to install or replace the battery.  
NOTE:  
1. Rechargeable battery is not recommended.  
11  
 
OPERATIONAL INSTRUCTIONS  
LOAD ADJUSTMENT  
To increase the load, turn the TENSION KNOB(22) clockwise.  
To decrease the load, turn the TENSION KNOB(22)  
counterclockwise.  
EXERCISE WORKOUT  
To start using the INSTRIDE ELLIPTICAL simply stand on the foot pedals with the front of your shoes  
close to the front edge of the pedal cap. Place your hands at a comfortable position on the handrail. Simply  
move your highest foot forward and follow the natural path of the machine.  
Start on a load level that is comfortable to familiarize yourself with the machine. Once you are comfortable  
start adjusting the load level to achieve the workout desired.  
Forward and Reverse  
The INSTRIDE ELLIPTICAL can be used in the forward and reverse direction to vary the muscles that  
you work out. This will also vary your workout helping you to stay motivated. To change directions, simply  
slow the pedals down until they stop and switch directions.  
Load Level Adjustment  
The load level of INSTRIDE ELLIPTICAL can be changed at any time during your workout. Adjusting your  
load level will allow you to increase or decrease your intensity level.  
12  
 
STORAGE  
1. To store the INSTRIDE ELLIPTICAL simply keep it in a clean dry place.  
2. The INSTRIDE ELLIPTICAL is approximately 33 1/2" long x 17 3/4" wide x 46 3/4" tall. These dimensions  
will vary. Please measure your INSTRIDE ELLIPTICAL if exact dimensions are needed.  
3. Grasp the HANDRAIL(7) and REAR STABILIZER(3) to move the INSTRIDE ELLIPTICAL, two people  
are required for moving. Do not use the Pedal Arms to move the INSTRIDE ELLIPTICAL.  
4. To avoid damage to the METER(23), remove the battery before storing the INSTRIDE ELLIPTICAL for  
one year or more.  
MAINTENANCE  
The safety and integrity designed into the INSTRIDE ELLIPTICAL can only be maintained when the  
INSTRIDE ELLIPTICAL is regularly examined for damage and wear. Special attention should be given to  
the following:  
1. Adjust the TENSION KNOB(22) and verify that the Flywheel System provides tension. The Flywheel  
System should provide many years of use.  
2. Verify that the WARNING LABEL(69) is present and legible. Replace the WARNING LABEL(69) if it is  
missing or damaged.  
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.  
4. Worn or damaged components shall be replaced immediately or the INSTRIDE ELLIPTICAL removed  
from service until repair is made.  
5. Only Stamina Products supplied components shall be used to maintain/repair the INSTRIDE  
ELLIPTICAL.  
6. Keep your INSTRIDE ELLIPTICAL clean by wiping with an absorbent cloth after use.  
13  
 
CONDITIONING GUIDELINES  
How you begin your exercise program depends on your physical condition. If you have been inactive for  
several years or are severely overweight, start slowly and increase your workout time gradually. Increase  
your workout intensity gradually, too, by monitoring your heart rate while you exercise.  
Remember to follow these essentials:  
Have your doctor review your training and diet programs.  
Begin your training program slowly with realistic goals that have been set by you and your physician.  
Warm up before you exercise and cool down after you work out.  
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower  
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity and  
build up to higher intensity as you become more aerobically fit.  
If you feel dizzy or lightheaded you should slow down or stop exercising.  
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic  
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so  
you don't tire too quickly.  
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below.  
For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of  
your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart  
rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing  
your heart rate.  
Measure your heart rate periodically during your workout by stopping the  
exercise but continuing to move your legs or walk around. Place two or three  
fingers on your wrist and take a six second heartbeat count. Multiply the results  
by ten to find your heart rate. For example, if your six second heartbeat count  
is 14, your heart rate is 140 beats per minute. A six second count is used  
wrist pulse  
because your heart rate will drop rapidly when you stop exercising. Adjust the  
intensity of your exercise until your heart rate is at the proper level.  
Target Heart Rate Zone Estimated by Age*  
Target Heart Rate Zone  
(55%-90% of Maximum Heart Rate)  
Average Maximum  
Heart Rate 100%  
Age  
20 years  
25 years  
30 years  
35 years  
40 years  
45 years  
50 years  
55 years  
60 years  
65 years  
70 years  
110-180 beats per minute  
107-175 beats per minute  
105-171 beats per minute  
102-166 beats per minute  
99-162 beats per minute  
97-157 beats per minute  
94-153 beats per minute  
91-148 beats per minute  
88-144 beats per minute  
85-139 beats per minute  
83-135 beats per minute  
200 beats per minute  
195 beats per minute  
190 beats per minute  
185 beats per minute  
180 beats per minute  
175 beats per minute  
170 beats per minute  
165 beats per minute  
160 beats per minute  
155 beats per minute  
150 beats per minute  
*For cardiorespiratory training benefits, theAmerican College of Sports Medicine recommends working  
out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart  
rate, the following formula was used: 220 - Age = predicted maximum heart rate  
14  
 
WARM-UP and COOL-DOWN  
Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm  
up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your  
heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump  
rope, and running in place  
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength  
or aerobic training session is very important. Muscles stretch more easily at these times because of their  
elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds.  
Do not bounce.  
Suggested Stretching Exercises  
Lower Body Stretch  
Place feet shoulder-width  
apart and lean forward.  
Keep this position for 30  
seconds using the body as a  
natural weight to stretch the  
backs of the legs.  
Floor Stretch  
While sitting on the floor,  
open the legs as wide as  
possible. Stretch the upper  
body toward the knee on the  
right leg by using your arms  
to pull your chest to your  
thighs. Hold this stretch 10  
to 30 seconds.  
DO NOT BOUNCE!  
When the pull on the back of  
the legs lessen, try a lower  
position gradually.  
DO NOT BOUNCE!  
Do this stretch 10 times.  
Repeat the stretch with the  
left leg.  
Bent Torso Pulls  
Bent Over Leg Stretch  
Stand with feet shoulder-  
width apart and lean forward  
as illustrated. Using the  
arms, gently pull the upper  
body towards the right leg.  
Let the head hang down.  
DO NOT BOUNCE!  
While sitting on the floor,  
have legs apart one leg  
straight and one knee bent.  
Pull the chest down to touch  
the thigh on the leg that is  
bent and twist at the waist.  
Hold this position at least 10  
seconds. Repeat 10 times  
on each side.  
Hold the position a minimum  
of 10 seconds. Repeat  
pulling the upper body to the  
left leg. Do this stretch  
several times slowly.  
Remember always to check with your physician before starting any exercise program.  
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state  
at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to  
return to the heart. Your cool-down should include the stretches listed above and should be completed after  
each strength-training session.  
15  
 
PRODUCT PARTS DRAWING  
FRONT  
Strap  
Strap  
BACK  
16  
 
PARTS LIST  
DIAGRAM#  
PART NAME  
QTY  
1
2
3
4
5
6
7
8
Main Frame  
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
2
2
1
1
1
1
1
1
1
1
2
1
1
2
2
1
1
2
1
1
4
2
1
1
2
4
1
1
2
2
2
2
Front Stabilizer  
Rear Stabilizer  
Left Pedal Arm  
Right Pedal Arm  
Upright  
Handrail  
Pulley and Axle  
Bearing (6003Z)  
Bearing Washer (M17)  
C Ring (17mm)  
V Belt  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
Flywheel  
Bearing (6900Z)  
Flywheel Axle  
Eyebolt  
Tension Bracket  
Tension Spring  
Tension Strap  
Buckle  
Tension Cable  
Tension Knob  
Meter  
Sensor Wire  
Magnet  
Foam Pad  
Left Cover  
Right Cover  
Crank Disk  
Disk Cap  
Left Crank  
Right Crank  
Flange Bolt (M8 x 1.25 x 25mm)  
Left Pedal Shaft (9/16" - 20, Left Hand Threads)  
Right Pedal Shaft (9/16" - 20, Right Hand Threads)  
Pedal Arm Bushing  
Axle Washer (M8)  
Left Pedal Cap  
Right Pedal Cap  
Roller  
Spacer  
Ring Cap  
Foam Grip  
Leveling Cap (45mm)  
Endcap (45mm)  
Round Plug (22mm)  
Round Plug (32mm)  
17  
 
PARTS LIST  
DIAGRAM#  
PART NAME  
QTY  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
Bolt, Button Head (M8 x 1.25 x 20mm)  
Bolt, Button Head (M8 x 1.25 x 57mm)  
Bolt, Button Head (M8 x 1.25 x 60mm)  
Bolt, Button Head (M8 x 1.25 x 100mm)  
Bolt, Button Head (M10 x 1.5 x 50mm)  
Bolt, Round Head (M6 x 1 x 43mm)  
Screw, Round Head (M4 x 25mm)  
Screw, Round Head (M5 x 15mm)  
Screw, Flat Head (M5 x 12mm)  
Screw, Flat Head (M5 x 15mm)  
Screw, Round Head (M5 x 0.8 x 15mm)  
Nut (M6 x 1)  
Nylock Nut (M8 x 1.25)  
Nylock Nut (M10 x 1.5)  
Thin Nut (3/8" - 26 x 0.16" thick)  
Nut (3/8" - 26 x 0.28" thick)  
Acorn Nut (M8 x 1.25)  
Arc Washer (M8)  
Lock Washer (M8)  
Wave Washer (ø16.5 x ø22.5 x 0.4mm Thick)  
Screw, Round Head (M5 x 15mm)  
Warning Label  
Wrench  
Allen Wrench (6mm)  
Manual  
2
2
4
2
2
4
6
4
1
1
4
2
2
2
2
2
6
8
8
4
1
1
1
1
1
18  
 
LIMITED WARRANTY  
MODEL 55-1615  
WARRANTY  
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship  
under normal use, service and proper operation for a period of 90 days on the parts and one year on the  
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT  
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,  
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,  
REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA  
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,  
gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is  
in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household  
purposes.  
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and  
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield  
Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited  
warranty, you will be requested to return the product or part to us for free repair or replacement at our option.  
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE  
(1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED.  
NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE  
(1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not  
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED  
WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE  
EXCLUSIVE REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this  
limited warranty or any implied warranty, the Warrantor reserves the right to require the product to be returned  
for inspection, at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of  
the enclosed warranty registration card is not required for warranty coverage, but is merely a way of  
establishing the date and place of purchase.  
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF  
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,  
SPECIAL OR INCIDENTALDAMAGESDUE TO BREACH OF THEABOVE WARRANTY ORANY IMPLIED  
WARRANTY.  
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty  
gives you specific legal rights, and you may also have other legal rights which vary from state to state.  
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED INDURATION TO THE  
DURATION OF THIS WARRANTY.  
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to  
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any  
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and  
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to  
have been made to the extent necessary to comply with such legal restriction.  
19  
 
NOTES  
20  
 
NOTES  
21  
 
FAX/MAIL ORDERING FORM  
Please do not return the product. For your convenience, Stamina has a Customer Service Department with  
a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520  
(in the U.S.) from 7:30A.M. to 5:00 P.M. Central Time, Monday through Thursday and 8:00A.M. to 3:00 P.M.  
on Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service  
Department will be able to assist you with your problem and the part will be mailed directly to your house.  
TELEPHONE  
CUSTOMER SERVICE  
Tel: 1 (800) 375-7520  
FAX  
ONLINE  
MAIL  
CUSTOMER SERVICE  
Fax: (417) 889-8064  
CUSTOMER SERVICE  
STAMINA PRODUCTS, INC.  
ATTN: Customer Service  
P.O. Box 1071  
Springfield, MO. 65801-1071  
Detach and Mail or Fax the Form Below  
Stamina Products, Inc.  
P.O. Box 1071  
Springfield, MO 65801-1071  
Mr./Ms:  
Address:  
City:  
Apt. #:  
Zip Code:  
State:  
IMPORTANT: We must have your phone number in order to process the order!  
Phone #: (  
)
Work Phone #: (  
)
Date Purchased:  
Model #:  
Purchased From:  
IMPORTANT : Before filling out the form below make sure you have the right information.  
Refer to the parts list to make sure you're ordering the right parts!  
PART #  
1
DESCRIPTION  
QUANTITY  
1
EXAMPLE:  
Rear Unit Assembly  
 

Sharp Computer Hardware JW 20CM User Manual
Sharp Garage Door Opener MD M3H User Manual
Sharp Video Game Sound System HT SB400 User Manual
Snapper Lawn Sweeper 1694498 User Manual
Sony Cordless Telephone SPP M937 User Manual
Sony Personal Computer PCV LX1 User Manual
Sony Personal Computer VPCSA User Manual
Stamina Products Elliptical Trainer 55 1630 User Manual
Stovax Indoor Fireplace 8517 P8517 User Manual
Swann Camcorder DVR 410 User Manual